Re: Booting Up Problem by nibbleguru on September 16th, 2002 07:22:04 AM
The battery of in Motherboard has gone weak. Replace it. Its very cheap. |
re booting up problem by Anonymous Ghost on October 01st, 2002 04:08:28 AM
There seem to be a loose connection best to check if the battery is ok there is also a possible othere things may go wrong best to clear cmos and resest to default also did you overclock? restore to default hope this helps |
re booting up problem by Anonymous Ghost on November 08th, 2002 09:58:18 AM
There seem to be a loose connection best to check if the battery is ok there is also a possible othere things may go wrong best to clear cmos and resest to default also did you overclock? restore to default hope this helps |
system is very slow by Anonymous Ghost on November 09th, 2002 01:30:39 AM
hi,my name is venkey. and i got a system of p3 233mzh,64 mb ram,tamoto mother board few months back, it was going fine with OS win-98.but now its dam slow.It takes a lot time to start the windows.i formated the Hard Disk and reloaded, and checked for bad clusters but there is not bad clusters and i replaced the hard disk still i am finding the same problem.plz would u tell me what 2 do. How will i get back my speed.
Bye |
HELP Nothing on Screen No Icons Start by loulou on November 22nd, 2002 04:00:28 PM
Cant get Icons or start bar on screen was clearing down some filed in add remove programs and using CD and when restarted nothing on screen checked in Dir looks like files are there dont know what to write after C: prompt |
rebooting constantly by Anonymous Ghost on December 02nd, 2002 10:47:50 PM
There was an electrical storm in the area last week. Ever since then the computer will not shut down completely. It keeps rebooting. I have to manually turn the entire system off. what can I do to stop the rebooting??? |
CMOS..settings ..or is..Win XP ?? by Anonymous Ghost on December 18th, 2002 06:44:16 AM
i have Win XP as my OS...and.. i recently changed my CMOS battery..coz it was down..but after that.. my computer settings have been changed somehow..the problem is this now i can not make my system go stand by.. though i have tried every settin CMOS ..all in vain...please help.... ! |
My Computer will not boot up by Anonymous Ghost on December 29th, 2002 09:17:27 AM
When i turn on my computer it comes with this message.
Verifying DMI pool data
Boot from ATAPI CD-ROM:BOOT FROM ATAPI CD-ROM:DISK BOOT FAILURE, INSERT EM DISK AND PRESS ENTER
Does anyone know what could be causing this. The computer does eventually come on but i want to fix the problem. |
system not booting at all by Anonymous Ghost on January 06th, 2003 04:47:09 PM
my computer is completely not booting it sounds like it is starting but nothing happens ... no display in the monitor and there is also no other noise from the cpu... |
XP KEEPS REBOOTING!!!!!!!!!!!!!!!!!!!!!!! by taunya on January 08th, 2003 04:50:15 PM
i put the computer in safe mode and installed a program...i forgot to change the computer back to regular mode before restarting, and now it just keep rebooting....PLS HELP!!!!!!!!! |
boot problem by Anonymous Ghost on January 11th, 2003 07:14:50 AM
i had win98 and XP.then put linux,but lilo has 98 and linux only.cant boot XP |
booting problem by Anonymous Ghost on January 13th, 2003 03:41:04 PM
When I turn on the computer, it will not boot, the monitor does not go on, until I turn the power supply off, then on again. Then it will work. Any suggestions? |
computer problem by Anonymous Ghost on January 18th, 2003 09:58:39 AM
We built a new computer and when ever we turn it on it will reboot for up to 7 times before it goes through and then it is ok as long as we dont turn it off. |
win2k reboots by Anonymous Ghost on January 18th, 2003 11:25:38 AM
When we turn our computer on it will reboot quite a number of times ( up to 9 } before finally going through. It always makes it to the same place, then starts to reboot. This happens when the windows screen is up and the blue loading bar is at the bottom of the screen. The blue bar makes it about half way across when it starts to beboot. We have Win2k, 256 pc133 ram, Intel coppermine 933 processor, 20 gig hd and a viewsonic A70 monitor. Hope you can help. Thank You. |
Boot Up Problem by Anonymous Ghost on January 20th, 2003 08:10:15 AM
My computer does not boot. It does not read from CD Rom and from floppy disc drive and hangs in the DOS format when the computer is switched on any suggestions please...???? |
Oh soooooo Slooooooooow by Anonymous Ghost on January 20th, 2003 04:07:19 PM
I have 40% memory left but my comp has gone so slow. When I move the mouse, the pointer follows several seconds later. Also have to reboot before opening some applications. Freezes often! Any suggestions? |
PCI Parity error on Bus/Device/Function 0128h on booting by Anonymous Ghost on January 29th, 2003 09:23:36 AM
After downloading latest .DAT files from McAfee Anti-Virus, computer operated just fine. Then the next morning, it displayed the above message when booting and is a SOLID failure. I can start in "SAFE MODE" but no drivers are loaded and therefore computer is useless. HELP!!!(Compaq 5838 Athlon Processor) |
selective booting by Anonymous Ghost on February 01st, 2003 08:57:28 PM
i turn on the pc and sometimes it boots into windows xp then freezes & i keep pressing reset button again & again until something happens the its fine for days. it also freezes through some of the post? i need help |
dsfdsfd by Anonymous Ghost on February 01st, 2003 11:09:35 PM
My computer does not boot. It does not read from CD Rom and from floppy disc drive and hangs in the DOS format when the computer is switched on any suggestions please...???? |
Boot problem by Anonymous Ghost on February 05th, 2003 06:44:08 PM
My laptop hangs even before booting and as soon as the power button is pressed!! It doesn't read from any of the removable media and I can't do anything to make it start, just wait till it starts by itself!! Please help if you know anything about this problem. Many thanks. |
booting problem by Anonymous Ghost on February 15th, 2003 03:55:52 AM
If you have an AMD XP CPU, make sure your BIOS settings have the multiplier at least as high as the "nominal" setting (unless you connect the L1 bridges on the chip). For instance, the 2000+ requires a multiplier of at least 13. It will automatically set 13 or greater to the nominal value, 12.5. Anything less than 13 will cause your symptoms of having to turn the power supply on and off in order to boot. |
computer fails to boot complete by Anonymous Ghost on February 17th, 2003 10:50:17 AM
i am using a 1.4GHZ system with 256mb memory operating system since purchase win xp. now as soon as i press the power button it start booting for about 5 seconds and automattically shut off and does the same thing everytime i try i put a new fan thinking it was heating problem over the processor but it makes no difference can you help with any suggestions. thanks djdave |
pls help me by Anonymous Ghost on February 28th, 2003 02:54:01 AM
When I turn on the computer, it will not boot, the monitor does not go on, until I turn the power supply off, then on again. Then it will work. Any suggestions? |
perfectly fine boot disk won't initialize by Anonymous Ghost on March 04th, 2003 01:11:06 AM
p5v580-at motherboard, p166 mmx, 128mb of simm ram, posts just fine, can enter bios just fine, recognizes floppy, cdrom, hard disks just fine.....refuses to recognize 98 boot disk.....boot to atapi cdrom....failure.
any ideas??? |
Computer keeps rebooting. by Anonymous Ghost on March 05th, 2003 05:54:32 PM
i am using a system with operating system Windows 98SE. now as soon as i press the power button it start booting for about 15 seconds and automattically shut off and does the same thing suggestions. It has happend about 10 temies so far today. It just started this afternoon. I need help!! send some idea's what to do to ontarioboi@hotmail.com |
Computer Restarting Problem by supersharp on March 12th, 2003 10:17:21 AM
About a week ago my computer started to randomly retart about once a day. This problem slowly started to get worse and worse as it restarted more oftern. Then yesterday it resatarted again, but after it did a disc check (due to the untimely restart) it restarted again not even letting me onto my XP OS. Now it will not let me on at all. If I cancel the disc check, it restarts. I have tryed going into safe mode but before it goes in it freezes. I have tred the 'Start your computer to the last settings that worked' option, and well, yes, it restarts. I am really baffled to what could be the problem to this. I have not added any new hardware recently, and I am currently running on my other hard drive installed on the computer with Win 98 on with no problems... Please could anyone give me some advice as all my college work is on the drive and I would be very upset if I had to format... :o( |
computer restarts, but goes to the safe mode with out any problem by uday on March 16th, 2003 03:14:04 AM
pls help me |
system restarts after booting by uday on March 16th, 2003 03:28:10 AM
pls help me |
XP Home - booting problem after changing networking defaults by Anonymous Ghost on March 19th, 2003 09:00:08 PM
I changed some networking setup values and now the system never completes the reboot cycle. It goes thru entire reboot and when it is almost at the end the system goes into reboot again and goes thru scanning the disk. Any suggestion to stop this ? It does not give me any option to change the BIOS so that I can use CD to boot. Thx |
xp booting problem by Anonymous Ghost on March 21st, 2003 01:38:32 PM
my xp operating system goes into stop and displays Stop:oxoooooooed (ox80e3e9oo,oxcooooo32,oxoooooooo,oxoooooooo)i have files on hard disc i need to recover so do not want to restore to factory default. How can i reboot the operating system.Pls Help!!!!!!!!! |
xp keeps restarting by moydc on March 23rd, 2003 11:59:50 AM
My computer was working fine and then one day it just started rebooting itself. When I trun it on it goes trhrough the normal startup process and then after the XP Pro logo apears, it restarts. Any suggestions? |
WINDOWS KEEPS LOOPING by Anonymous Ghost on March 26th, 2003 06:51:40 PM
HELLO, I TURN THE COMPUTER ON AND IT BOOTS UP THROUGH WINDOWS AND THEN THE DESK TOP IS THERE BUT WINDOWS KEEPS RUNNING OR LOOPING AND IT WON`T STOP AND THE MOUSE WON`T WORK AT ALL ONLY THE RIGHT CLICK WORKS SOMETIMES BUT I CAN GET IT TO STOP LOOPING BY HITTING THE CONROL ALT DELETE KEYS AND END TASKING THE PROGRAMES RUNNING BUT THEN MY MOUSE STILL WON`T WORK SO I AM HAVING A HARD TIME GETTING IN TO THE MSCONFIG TO GET THIS SYSTEM CLEANED OUT THERE IS WAY TO MUCH RUNNING IN THIS COMPUTER PLEASE HELP I NEED TO GET THIS THING WORKING IT IS MY FRIENDS AND THEY HAVE NOT BEEN ABLE TO US IT FOR ABOUT TWO MONTHS THEY ARE GOING NUTS. |
XP Professional Rebooting constantly by Anonymous Ghost on March 29th, 2003 02:46:01 PM
As the title states, I am having a constant reboot/system lockup problem in XP Professional. I am not sure as to whether it is a problem with the OS as even when I tried to run Memtest86 to test my memory, the PC still kept locking up and rebooting even though I had not logged on to Windows. I have already tried at least three repair installation and two fresh installs, but this behavior is still there. Sometimes it even locks up when I'm in the BIOS. My specs :
Compaq Presario 5108US
-1.2 Ghz Athlon
-384MB RAM (although the computer only recognizes 376MB. I had a 164-Memory Size Error problem before and so I set the POST test to Full Boot. It still only acknowledges 376MB but it does bring up the 164 Memory Size error anymore)
-S3 ProSavage Display Adapter
- AC 97 Sound Card
Any and all forms of assistance would be highly appreciated. |
xp keeps rebooting by Anonymous Ghost on April 01st, 2003 09:43:38 PM
just installed xp pro and the computer reboots after reaching the sign on screen. previously removed 98 because of explorer locking up system. |
Operating Systems by Anonymous Ghost on April 13th, 2003 12:17:13 AM
Booting up problems r ok, but Please give answers. |
computer won't boot by Anonymous Ghost on April 14th, 2003 04:56:33 PM
computer starts to boot, then stops. Monitor displays no signal message. |
comp won't load by Anonymous Ghost on April 14th, 2003 06:22:55 PM
i got the same problem my comp won't load up it'll just load for 15 sec then restart.. soo does anyone actually help w/ these? |
Old compaq 233 pentium 1 by Anonymous Ghost on April 17th, 2003 05:59:59 PM
This old tub wont boot up, when you switch on both green lights come on for a few seconds then there is a loud beep,beep noise and the bottom green light goes out and nothing else happens, also no display at all.
Checked all connections to/from motherboard, cant see anything. Please do you have any ideas? |
it does not boot by Anonymous Ghost on April 17th, 2003 10:01:12 PM
i am using amd 1.7G with 256mb ram but when i start the com it seem not to boot and every time gets hang even the keyboard so i need to keep on press the ESC key in the beging of the booting stage before it hangs.so wat can i do about this. |
atapi error by Anonymous Ghost on April 19th, 2003 04:37:57 PM
i agreed to fix my friends pc months ago but i keep getting the following message:
Verifying DMI pool data
Boot from ATAPI CD-ROM:BOOT FROM ATAPI CD-ROM:DISK BOOT FAILURE, INSERT EM DISK AND PRESS ENTER
i installed a new hard drive for her pc but then i kept getting that error message. any ideas on how to fix the problem. the computer is booting: A, CDROM, HD, etc... |
booting up problem by alkin90 on April 20th, 2003 08:50:39 AM
dzxfv |
Booting up very slow by Anonymous Ghost on April 24th, 2003 09:39:13 PM
There is one BEEP after "Welcome" message. Then it took about 2 minutes for all icons to appear on the screen.
Please help! phaisane@juno.com |
XP Professional booting up very slow by Anonymous Ghost on April 24th, 2003 09:44:48 PM
There is on BEEP after "WELCOME" message. Then it took about 2 minutes for all icons to appear on the screen.
Expert, please help! Phaisane@Juno.com |
164 memory error by Anonymous Ghost on April 30th, 2003 02:48:50 AM
when a i start my computer a message come up and it say 164 memory error why ? n after wehn it log on some time i play like 10 min or more or it depend it always freeze n i have to reboot n it always doing that any one know what i should do ? or why it freeze everytime ? |
booting up problems by Anonymous Ghost on May 03rd, 2003 02:14:15 PM
Over the past week I have had problems booting up my computer. I try for the better part of a half hour and keep shutting off the computer and then on again. Somehow during one of these trys, it finally boots up. I left the computer on for several days to keep from having to try this again, but finally shut it down for a few hours. The motor sounds a bit "tired" when starting cold, but, would re-boot if it was already running. Any suggestions? |
computer startups - continuous rebooting by Anonymous Ghost on May 04th, 2003 08:46:59 AM
for many of these type problems the answer may lie in a bad power supply. Also some mobos will reboot if they heat up too much - you may have a bad mobo |
answers by Anonymous Ghost on May 14th, 2003 02:27:44 PM
does any one answer any of these post |
Win ME boot errors by Anonymous Ghost on May 14th, 2003 04:57:58 PM
After a hard lock-up while online, I force shutdown my Compaq Pressario 1200 laptop. Upon reboot, about 2 seconds after Windows Millenium Edition began to load, the message "Please wait while Windows updates your configuration files. This may take a few moments." It hung at that point and no further drive activity ever occured. I tried safe mode with the same result. I tried step-by-step confirmation, and selected "No" to loading everything (including the registry) and still got the message immediately after the system loaded the ifshlp.sys driver. Is there a boot disk that will circumvent this hang? All thoughts welcome. Thanks. |
djdaves boot problem above 17th Feb by riggar on May 14th, 2003 06:12:47 PM
dj did you get anywhere ? |
my computer doesn't boot, and it says some command missing? by xxzeroxcoolxx on May 28th, 2003 04:54:20 PM
hi, when i turn on my computer it goes throught he normal steps, then when it gets to loading windows 98 it goes to a screen saying that their is a missing or corrupted file command.com then it says (e.g., C:WINDOWSCOMMAND.COM) if you could help me with this i would be really really happy......thank you |
re: my computer doesn't boot, and.... by Anonymous Ghost on June 02nd, 2003 07:41:25 PM
Sounds like you may need to reinstall the operating system to restore the corrupted file (if it is in fact corrupt). If the system will let you boot in safe mode you could try running scan disk. I doubt you can get in with a corrupt command.com though. Just some thoughts. I haven't tried this, but , if you can boot from a floppy you may be able to start windows from there, then scan it. Good luck from a noob! |
Now my computer wont even start!!! by xxzeroxcoolxx on June 06th, 2003 12:12:21 AM
Before my cmputer said that the command file isa corrupted or missing and now it is not even saying that, it just goes strait to the windows 98 booting and then turns off...this is really irritating me since it is my sisters computer and i can't even get into the desktop to make a boot disk, and i lost the old boot disk and windows 98 se cd a long time ago... If any 1 would have idea about how i could fix my computer e-mail me at XxZeroXCoolxX@aol.com thank you very much for taking ur time to read this... |
help by Anonymous Ghost on June 13th, 2003 07:01:29 AM
at boot up on the screen it says aptai cd rom failure and when in windows the USB driver is missing the control host |
My computer does post check, then dies by makowski on June 18th, 2003 10:29:16 AM
I have dos 5.0 and it does the post test fine. then it just sits there. no
c: prompt. Tried booting from a drive and it says invalid disk choice. Any suggestions (besides shooting it?) |
Computer keeps restarting by Anonymous Ghost on June 22nd, 2003 02:14:43 PM
My Win98 Computer keeps restarting itself regularly. Pls. Help!!!! |
Boot Failure after changing CMOS Battery by Anonymous Ghost on June 28th, 2003 08:33:03 AM
I changed CMOS battery. After restart the screen of the monitor has shrinked to about 1/4th vertically and appearing in the middle. Hard disk light remains on and nothing happens. What may be the problem? |
hard disk troubleshooting by ektanit on July 07th, 2003 05:47:39 AM
I have the Toshiba laptop with me with external CD drive. I connected the CD drive, copied my items to hard drive, disconnected the CD drive and then shut down my laptop. The next day when i tried to boot my laptop, it is giving me Insert system disk in drive and press Enter. I inserted bootable floppy and after booting from the floppy drive, it brought me to A: prompt. NOw I try to exectue FDISK from A: prompt and it gives me No fixed disk present. Has my hard drive gone bad. How can I troubleshoot ? Please help. |
Booting troubleshooting by Anonymous Ghost on July 11th, 2003 02:28:27 PM
How do i stop a screen saying pick normal,safe mode,safe mode with metwork... It always comes up when i start my computer please help,thank you |
computer just keeps restarting...restarting...restarting...etc. by Anonymous Ghost on July 22nd, 2003 03:25:13 PM
my computer boots up normally...but then after it "verifies thepool data" it acts like its going to another screen, but instead, it just reboots the whole system on its own, it just keeps doing this, over and over and over..please help |
no booting by Anonymous Ghost on July 26th, 2003 03:28:04 PM
When I turn on the computer, it will not boot, the monitor does not go on, until I turn the power supply off, then on again. Then it will work. Any suggestions? |
disk boot failure by Anonymous Ghost on August 01st, 2003 09:55:13 PM
When i turn on my computer it comes with this message.
Verifying DMI pool data
Boot from ATAPI CD-ROM:BOOT FROM ATAPI CD-ROM:DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER |
My Compaq Presario computer keeps restarting everytime I log into my password sc by Anonymous Ghost on August 04th, 2003 03:38:57 AM
my windows are Windows 2000 professional
and when i get into the log in password screen it automatically restarts again |
booting problems by Anonymous Ghost on August 13th, 2003 06:14:47 AM
when computer is switched on after the start registry scanner opens on its own and scans the registry and screen flashes registry has failed to fix the problem and system boots it happens every time the computer is booted but after scan is over then it starts normally but the process takes a long time .Tried booting with bootfloppy to reinstall but in vein please help me |
intalling oracle by Anonymous Ghost on August 15th, 2003 03:46:12 PM
Iam trying to reinstall oracle in windows 2000. But I am not able to do that. First I deinstalled oracle and attempted to reinstall it. Now I am getting the error
error in writing to
c:oracleora8istarterdbsys1risc.0.0.jar
This error is getting after configuring net8 client.
can any one help this
thanks in advance |
CAN'T LOGON OR ANYTHING ELSE HELP ME!!! by Anonymous Ghost on August 22nd, 2003 01:35:14 PM
When i start up myPC it works fine until it gets to the logon screen it all goes blank and the only thing on the screen is the mouse pointer what should i do? PLEASE HELP! |
computer by Anonymous Ghost on August 23rd, 2003 03:05:34 PM
wont recognize disc. |
computer by Anonymous Ghost on August 23rd, 2003 03:08:27 PM
wont recognize disc. |
Slow Running - Windows 98 by johnlaas on August 28th, 2003 02:44:15 PM
My old PC, a Pentium II, has decided to go into crawl mode. Is there anything I can do to correct this? Do I need to clean up the .ini and .sys files? If yes, what should they look like? Any help appreciated. |
computer wont start by Anonymous Ghost on August 31st, 2003 10:46:33 PM
i loaded ms publisher on windows 95. it said to restart to finish the install but now it trys to start but goes to the safe mode option. i click it but it keeps going back and then finall says: a fatal error has occurred. I tried to start with a Start Up disk but it goes to an A: prompt and I do not know what to put in. |
Windows NT could not start by koteshnrao on August 31st, 2003 11:01:19 PM
Windows NT could not start because the following file is missing or corrupt
WINTNTSYSTEM32CONFIGSYSTEMHardware Profilelast known good menu
You can attaempt to repair the files by strting windows NT set up using the origianl set up floppy disk or CD-ROM
Please help me with this as i have lot of important data on my hard disk
When i put CD rOM it isnot recognised ,
Please let me know how can i create a repair disk |
File Erasure by Anonymous Ghost on September 05th, 2003 10:58:50 AM
Sony Vaio 2.4g processor w/two hard drives, 60g and 16g. Periodically I Reinstall WinXP w/the three system recovery discs and then wipe a the unused space with a binary wipe utility. Is there a recovery software that will find any info I may have wanted to save. |
computer freezes by akhil_iitkgp on September 11th, 2003 08:29:01 AM
my comp often freezes while booting after the screen of (windows is starting up).i'm resetting around 4 times to fix this.it also freezes while some program runs.i have win2000,p3. |
my computer keeps rebooting over and over please help by Anonymous Ghost on September 13th, 2003 11:56:58 AM
My computer keeps rebooting over and over. flashing to windows xp and then to reboot |
Memory Check Problem by Anonymous Ghost on September 14th, 2003 12:46:13 PM
When my system boots up the memory check repeats itself 3 times before recognising the amount of memory i have on my m/board. However, since i have installed a new VGA card i cannot use it as it says that i do not have enough resources to run the card. Can you help as this never use to happen (ie mem check repeating itself). And i have replaced the new card with the old but the problem is still occuring. |
win2k boot up loop by Anonymous Ghost on September 15th, 2003 01:16:19 AM
after i change my hdd containing win2k OS to my computer, it runs till it comes to the part where it loads GUI and it will aotu reboot and repeats over and over. Please help |
my computer will not boot up by Anonymous Ghost on September 19th, 2003 02:08:35 PM
boot from atapi cd-rom boot from atapi cd-rom disk boot failure. |
Memory Check Problem by Anonymous Ghost on September 14th, 2003 01:46:13 PM by dave194 on September 23rd, 2003 03:26:39 PM
Check the seating of the ram memory chips, should be overlock clips both ends. Since you have changed a card and back again may have disturbed the seating.
If this fails take out RAM leaving one in, try start up again - if necessary replace with the other RAM etc. may have faulty RAM. good luck and place the chips on antistatic bag and hold on to the metal case to discharge your static. |
computer freeze by Anonymous Ghost on September 24th, 2003 10:55:17 PM
computer is freezing up and the green on off switch will not work when this happens. sounds like my computer is running but screen is blank. please help. |
computer randomly reboots automatically by Anonymous Ghost on September 25th, 2003 05:37:27 AM
when i am using my computer it just automatically and randomly (not for any particular program or anything) reboots why is this? buddy12232000@yahoo.com |
my hardrive makes a beep sound when booting by Anonymous Ghost on September 25th, 2003 05:44:05 AM
when i start my computer, i get to the windows screen but then it makes one beep noise and pauses for about a couple of minutes before the harddrive resumes and continues to load windows. why is this? |
win 98se doesnt restart when you press it by Anonymous Ghost on September 25th, 2003 09:49:54 PM
i get a blue screen then a black when i press ok |
PC hangs upon power on by Anonymous Ghost on September 26th, 2003 03:04:27 AM
When I restart my pc this morning it just hung at the screen where by you can press DEL to enter CMOS. Why is it this way? Now I can't use my PC! Please any kind soul pls kindly assist. I will be very grateful to whoever help me solve this problem. Thanks a million in advance. |
Presario 5108us models by Anonymous Ghost on October 09th, 2003 08:07:03 AM
Everyone that has trhe problem of freezing up, you HAVE to use pc100/133 CL3, very important, you get CL3. most memeory is CL2, so you have to check, to make usre it is...Second, PC133, will NOT run properly, if you have the system in 100mhz mode. YOu have to upgrade the CPU to a 133mhz cpu, the max, i know of, is a AMD 1400 running at 266mhz, then change the jumper on the mobo, to run accordingly. |
my computer dont recognize by Anonymous Ghost on October 16th, 2003 02:10:32 PM
when i try t install a program,my
computer dont recognize it anymore, why??? |
FLoppy drive is read everytime system starts or logging off or logging in.how do by Anonymous Ghost on October 17th, 2003 10:24:05 PM
FLoppy drive is read everytime system starts or logging off or logging in.how do i avoid?OS:win2000 |
games by Anonymous Ghost on October 24th, 2003 06:57:08 PM
when playing a game on aol it stops or rather freezes up |
system switching off with in 10 sec by Anonymous Ghost on October 30th, 2003 05:30:29 AM
my system is switching off with 10 sec it is switched on |
Toshiba Laptop and Memory by Anonymous Ghost on November 08th, 2003 01:51:35 PM
I recently bought a Toshiba Satellite Pro 4600 laptop and the following has happened and it has me baffled.
The machine came with 128 meg of Samsung RAM
I purchased a 256 meg stick and installed it and it worked until I removed the ram and placed it in another slot.
The computer just sits it wont post not warnings no nothing just the light comes on to indicate that the computer is turned on and the screen backlight comes on. (if you install a wrong ram module in this machine it comes up with a warning just after the point that it hangs at)
So I installed the original 128 meg stick and it too produces the same result.
I remove another stick from another machine and the computer boots up and runs fine. So I purchased another stick of ram and it all ran fine. I then removed this stick to try another combination of ram modules to find the same result as above.
I am sure that this is not static electicity as the original 128 meg stick runs in another old pentium 2 laptop that I have and it works fine and I deliberately held one hand on the serial port (metal at the back of the machine) to earth myself to the machine while I changed the ram both times.
Im sure that if I buy another new stick of ram it will work fine until I remove it again.
Yes I did disconnect the power and removed the battery when installing the new ram
Help this is getting expensive
THanks in advance |
Re: Booting Up Problem by Anonymous Ghost on December 02nd, 2003 08:46:39 PM
my computer won't boot it says invalid disk what do i do? |
Re: Booting Up Problem by jooliee on December 03rd, 2003 10:07:25 PM
When i star the laptop, it starts up properly and all the caps lock and num lock works, but when it gets up to the screen where it says del:setup etc. it completely freezes and nothing will respond. Please help!! |
Re: Booting Up Problem by Anonymous Ghost on December 06th, 2003 11:06:58 PM
when booting up... it frezzes; Dead frezzes(with a lime green line of squares across the desktop) and I have to manually turn it off and get something active... before it fully loads, and lots of times it pulls an error(blue screen of death) up reading "File Name : VKD(01) + 00001448 Error : 0D : 0028 : C00AE90C" |
boot problem by Anonymous Ghost on December 22nd, 2003 09:46:59 AM
i have windows xp...my computer WILL boot up...until you get to the user screen where you choose a user and sign in...well mine won't let me type a password...and all users have passwords...help me!!!!!! |
Re: Booting Up Problem by Anonymous Ghost on January 23rd, 2004 06:01:52 PM
when I log on to msn.com, My computer will beep continuosly sounds like a bouncing noise, I can't access any thing, and then It will take me off line and I will get the restart or swicth user window flashing on and off. Inbetwwen the flashing I hit restart and the problem goes away. Do this sound like blaster virus? How do I fix it? |
Win ME ifshlp.sys missing error by Anonymous Ghost on January 24th, 2004 03:28:29 AM
my sony laptop has been installed by windows ME. when i executed a flash application and restarted it says that the system files are missing as like ifshlp.sys missing and prompting like
c>
system files missing(e.g c:\windows\vmm.dll missing) |
Re: Booting Up Problem by Anonymous Ghost on January 27th, 2004 10:38:01 AM
After I boot up I cannot get on my home page. It just says the page cannot be found. If I continue to shut down and restart a few times, I am successful in getting it. How do I correct the problem? |
Re: Booting Up Problem by Anonymous Ghost on January 31st, 2004 01:05:17 PM
I've been told I have the Blaster virus. My computer keeps trying to reload over and over before it gets to my desk top. It does not reconize a fix-it disk or operating sys. disk from the cd rom during this process. Can someone please tell me what to do. |
Re: Booting Up Problem by Anonymous Ghost on February 03rd, 2004 12:42:17 PM
why do i get the c:> after one beep? |
Re: Booting Up Problem by Anonymous Ghost on February 03rd, 2004 12:47:11 PM
if the system issues a beep and the c:/> prompt appears on the screen, what condition is indicated? please help |
Re: Booting Up Problem by Anonymous Ghost on February 19th, 2004 09:38:03 AM
I want to boot my sons songs from his web sight and before I could boot his 3 songs .Now it says Has problem connecting. |
Re: Booting Up Problem by Anonymous Ghost on February 22nd, 2004 05:27:55 PM
i have installed bell smypatico dsl... windows xp doesnt want to load it as it says does not pass windows logo testing.i can get it to work, but when i shut down and turn back on, it wants me to start in"Lst known good Config.
so the modem isnt loaded again. i dont know who to load it to stay and have it there when i restart. its a pain reloading EVRYTIME i go online..help???
Rob |
Re: Booting Up Problem by kodak on February 23rd, 2004 02:30:06 AM
Hi, I need some help on solving a problem.Every time I restart my computer i get an error saying win xp has recovered from serious error.The error looks like this :
BCCode : a BCP1 : 0000FFDF BCP2:00000002 BCP3 : 00000001
BCP4 :806BB90E OSVer : 5_1_2600 SP:1_0 Product : 256_1
HELP,Thank You |
Re: Booting Up Problem by kodak on February 23rd, 2004 07:13:06 AM
Hi, I need some help on solving a problem.Every time I restart my computer i get an error saying win xp has recovered from serious error.The error looks like this :
BCCode : a BCP1 : 0000FFDF BCP2:00000002 BCP3 : 00000001
BCP4 :806BB90E OSVer : 5_1_2600 SP:1_0 Product : 256_1
HELP,Thank You |
Re: Booting Up Problem by Anonymous Ghost on February 23rd, 2004 11:23:05 AM
when i start computer all i get on screen is insert bootable media |
Forgotten Password by Anonymous Ghost on February 23rd, 2004 06:44:42 PM
I have MAC Operating System and I cannot even get on to my computer at all because I can't the new password I just set |
Re: Booting Up Problem by Anonymous Ghost on February 24th, 2004 02:29:36 PM
windows xp boot very slow what can i do to repair this problem |
Re: Booting Up Problem by scorpio on February 25th, 2004 10:04:49 AM
windows xp boot very slow what can i do to repair this problem
Post it as a seperate problem and I will be happy to answer it. |
cant get to my mail why by Anonymous Ghost on February 27th, 2004 11:26:40 AM
plz help with it |
Booting Problem by Anonymous Ghost on February 29th, 2004 10:13:17 AM
When i turn on my computer it comes with this message.
Verifying DMI pool data
Boot from ATAPI CD-ROM:BOOT FROM ATAPI CD-ROM:DISK BOOT FAILURE, INSERT EM DISK AND PRESS ENTER
I'm at my wits end and its driving me crazy. Please email me at buckeyechick740@yahoo.com if you can help me. |
Keyboard and mouse errors by Anonymous Ghost on March 01st, 2004 03:31:19 AM
my xp pro wont recognise the keyboard and mouse. why is this? |
Re: Booting Up Problem by Anonymous Ghost on March 08th, 2004 03:18:35 AM
I have Laptop Compaq presario 1400
when I turn it on the message in screen says (The Bios ROM was corrupted try to recover it)
please help me..E-mail ML70@Ifrance.com |
Re: Booting Up Problem by Anonymous Ghost on March 10th, 2004 12:51:53 AM
cant rember password on ibm-750 harddrive so i cant do anything to get it going is there any help you can give |
Re: Booting Up Problem by Anonymous Ghost on March 10th, 2004 08:40:37 AM
I have an old Compag 350MZ with XP that I cleaned registry with System Mechanic 4. Backed up Reg before cleaning. When I compacted reg, system will not boot. Just hangs. Can I get into the system.
gcginc@charter.net |
Re: Booting Up Problem by tinytune on March 11th, 2004 11:23:18 AM
my computer won't boot it says invalid disk what do i do? shorttinytune@aol.com |
the fan in my compaq presario 1700 is not working by Anonymous Ghost on March 14th, 2004 08:22:59 AM
The fan in my compaq laptop is not working!Should i stop using it in case it completely blows, or should i keep on running it?Is this a probelm that would need a lot of money to get fixed |
Re: Booting Up Problem by Anonymous Ghost on March 17th, 2004 04:53:07 PM
I Have Compaq Presario 1400.It bypasses, Startup.SaysIneed to reinstall Windows.Where can I get disk to reinstall. Thank You. |
Re: Booting Up Problem by Anonymous Ghost on March 18th, 2004 04:56:21 PM
My monitor flickers weakly and then goes blank the first time I power up in the morning. After I turn the monitor on and off/or plug and unplug the video cable, it works fine and will work even if I turn the computer on and off any number of times throughout the day. It's only on the initial boot. It's happened five straight days. All connections are tight. RSVP |
Re: Booting Up Problem by Anonymous Ghost on March 27th, 2004 08:34:59 AM
when i boot my cpu it gives ..after displaying face table..and that it shows massages." verfying pool data.no further activities and stops here after.
Although I tried to boot it with bootdiskett or direct from CDRom.But all result NoN..no activities;
please help me to come out this problem
thanks |
Re: Booting Up Problem by Anonymous Ghost on March 27th, 2004 02:14:43 PM
Whoops!I am logged on through guest account and i need to be logged in through
Administrator account .I hope you can help me and THANK YOU!SO MUCH! |
Re: Booting Up Problem by swillis61 on April 18th, 2004 12:13:00 PM
my computer wont read cd ram because num caps scroll light keep flashing can not get into my bios because says invalid password but i know it the right passaord can you help me with this |
Re: Booting Up Problem by Anonymous Ghost on May 12th, 2004 09:18:13 AM
I have a pentium computer with an at power supply. Computer is ok but when reset sw is pressed monitor remains blank,fan is running and cd rom drive is opening. |
Re: Booting Up Problem by Anonymous Ghost on May 21st, 2004 07:16:20 AM
When I shut down the computer it kept trying to reboot. Now it won't boot up at all. I am getting boot disk not found on all drives. Any help would be greatly appreciated. myvern@yahoo.com |
Re: Booting Up Problem by myvern on May 21st, 2004 07:22:50 AM
When I shut down the computer it kept trying to reboot. Now it won't boot up at all. I am getting boot disk not found on all drives. Any help would be greatly appreciated. myvern@yahoo.com |
Re: Booting Up Problem by Anonymous Ghost on May 21st, 2004 02:32:56 PM
I have Compac 5000 series with Windows ME each time I boot up all checks are complete to the desktop icons appear then i get a blue screen with error message: error occurred hit key to return to windows, hitting any key or ctrl+alt+delete freezes the system.
Help |
Booting Up Problem by Anonymous Ghost on May 24th, 2004 01:40:59 AM
I am satish maurya from mumbai,india, i have a pc with 810 via chipset,celeron 400MHz cpu,128 mb RAM, It works fine Monday to saturday and then after when i try to boot the pc on monday it not boots, if i restart again and again suddently it starts, tell me what is the problm and what to do... |
Re: Booting Up Problem by Anonymous Ghost on June 04th, 2004 07:52:21 AM
I inherited a dell laptop from my
roommate, for debts he owes me. So How
can I logon to his laptop and use it
without a password. |
Re: Booting Up Problem by Anonymous Ghost on June 13th, 2004 08:51:45 PM
on my dell laptop it boots up then says dell on it and thats as far as i can get on it. then the screen goes blank...can anyone help me out.
mroriginal1965@sbcglobal.net |
Re: Booting Up Problem by Anonymous Ghost on June 14th, 2004 12:02:36 PM
When I turn on my computer, no icons appear and as soon as the start bar appears it goes away and nothing else happens, it will recognize any disks or cds. What should I do? |
Re: Booting Up Problem by Anonymous Ghost on June 16th, 2004 08:24:39 AM
Hi I have a Toshiba Satellite and when I boot up it goes immediately to the hibernation page and although I reset nothing happens, and the system continues to go to the hibernation page...any advice much appreciated..John |
not bboting error message by Anonymous Ghost on June 18th, 2004 04:03:01 AM
i have a compaq pressario 5000 desktop pc. when i switch on the machine it is not booting . it is giving a message like this " 162 : system option not set " please give a solution for this. my mail id is arun_ilango@yahoo.com |
not booting error message by Anonymous Ghost on June 18th, 2004 04:08:36 AM
i have a compaq pressario 5000 desktop pc. when i switch on the machine it is not booting . it is giving a message like this " 162 : system option not set " please give a solution for this. my mail id is arun_ilango@yahoo.com |
strange noise by Anonymous Ghost on June 26th, 2004 01:00:57 AM
i have a sony vaio PCV ---- . recently the solid blue light on the power button started flashing purplr-blue and my CPU is making a continous screeach like noise, Whats the problem? |
my post is above email is abreaver8069@msn.com by Anonymous Ghost on June 26th, 2004 01:05:27 AM
help me |
Re: Booting Up Problem by Anonymous Ghost on July 02nd, 2004 03:50:48 PM
systems boots up until starts to fail to initilize internet explorer. |
Re: Booting Up Problem by Anonymous Ghost on July 09th, 2004 04:16:39 AM
my laptop computer nootbook 100 fraze when booting with a long beep p'se help me |
Re: Booting Up Problem by Anonymous Ghost on July 28th, 2004 10:56:12 AM
I also have a Sony Vaio PC and after on for about 1 hour, it made a LOUD BEEP, the light was flashing on the drive - went ORANGE, then I smelled smoke - electrical problems. I immediately unplugged the system, took it apart and now what? It doesn't appear to be the drive as it will turn back on. IS THIS THING going to catch on fire if I ever use it again? |
Re: Booting Up Problem by Anonymous Ghost on July 29th, 2004 06:29:50 PM
win-me not restarting,ifshlp.sys is missing or correpted.please help |
Re: Booting Up Problem by Anonymous Ghost on July 29th, 2004 06:35:16 PM
win-me not restarting because ifshlp.sys file s missing or correpted.please help |
Re: Booting Up Problem by Anonymous Ghost on July 29th, 2004 06:38:21 PM
win-me not restarting because ifshlp.sys file s missing or correpted.please help |
Re: Booting Up Problem by Anonymous Ghost on August 02nd, 2004 10:51:27 AM
My Laptop Compaq armada 1750 starts compaq utilities on booting |
Laptop toshiba not starting by Anonymous Ghost on August 02nd, 2004 10:56:08 AM
The Fan for the my Toshiba Laptop is not working with my Laptop but it works with other Toshiba Laptop of the same model please help |
Re: Booting Up Problem by kix on August 02nd, 2004 10:32:52 PM
When i turn on my computer it comes with this message.
Verifying DMI pool data
Boot from ATAPI CD-ROM:BOOT FROM ATAPI CD-ROM:DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER |
booting up problem by kix on August 02nd, 2004 10:35:00 PM
When i turn on my computer it comes with this message.
Verifying DMI pool data
Boot from ATAPI CD-ROM:BOOT FROM ATAPI CD-ROM:DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER |
Quite slow Booting Up Problem by Anonymous Ghost on August 05th, 2004 02:36:52 AM
Booting of my pc takes at least 24 minutes,there is no missing/corrupted files in operating systems.(win-xp)
Wheather there is problem is BIOS or in
MOTHER BOARD or anything else?
My email add: himanshu100_mehta@yahoo.com |
Re: Booting Up Problem by Anonymous Ghost on August 07th, 2004 07:10:51 PM
can not boot up computer..keeps sending following msg. disk boot failure ,insert disk press enter... we do not have the disk where can we obtain one ????? fireman298@yahoo.com |
Re: Booting Up Problem by Anonymous Ghost on August 08th, 2004 01:20:35 PM
I brought this PC second hand, and it never came with the Recovery cd's.
It is Windows XP Professional,
I have downloaded the 6 floppies from M/S.
Whenever I boot up, it goes to Verifying DMI pooldata........
Remove disks or other media.
press anykey to restart
I don't have anything in any of the drives!
Please can you help?
leehugman@aol.com
Yours sincerely
Lee Hugman |
Frozze by Anonymous Ghost on August 15th, 2004 05:32:30 PM
Every time on XP when gets to the screen name the mouse and keybord frezzes. |
Re: Booting Up Problem by Anonymous Ghost on August 16th, 2004 06:49:03 PM
PIII/Freezes constantly. Did harddrive format.Tried to reinstall Win/98 freezes before completion of install.Cannot comlete install. Any help thanx. geo53rge@netscape.net |
Re: Booting Up Problem by Anonymous Ghost on August 17th, 2004 04:14:54 AM
What is a CL2 error |
Re: Booting Up Problem by Anonymous Ghost on August 23rd, 2004 02:05:23 AM
my computer compaq presario 5000 boot slow whate can i do .
my email is ibr62a@yahoo.com |
Booting Up Problem on 1700 pressario by Anonymous Ghost on September 05th, 2004 10:12:56 AM
No boot at all. The fan is not working.
Is the cpu burned? |
Booting Up Problem by Anonymous Ghost on September 19th, 2004 04:17:45 AM
My laptop(Toshiba Satellate Pro 4600) does not boot up. It was working fine until yesterday, I tried to turn it on this morning and nothing come up on the screen. It seems its not powering up the system. I can see that there is a power, the green light is on, but it's not activating anything at the computer. I removed the hard disk nothing come up the screen. I removed CPU there was no beep,but the green light became yellow, which means there is no power at the computer. I removed ram, there is no changes. I don't know how to check VGA that is on board one. Also I couldn,t find the BIOS Battery on the board. Where is that located? What should I do, what is faulty? please suggession.... Thanks |
Re: Booting Up Problem by Anonymous Ghost on October 15th, 2004 09:40:14 PM
I place cd in tray and restart, goes through rebooting process but then I get a blank blue screen, besides the usual restore to original factory. And then I just restart and try again.
Any ideas? |
Re: my compter will not defrag it will disk cleanup and scandisk by Anonymous Ghost on November 15th, 2004 03:52:50 PM
when it comes to defragging i can let it go the whole 8 hours and it will not move from 1% is that good or bad help me please |
Re: Booting Up Problem by Anonymous Ghost on November 25th, 2004 09:29:57 PM
every time i boot the pc , a sound come from the mother board. and the monitor does not show anything.. where is the problem.. u can email me at hamzah282@yahoo.com.sg pls reply soon i need it to recover as soon as possible. |
screen goes black after flickering by Anonymous Ghost on December 08th, 2004 09:44:05 PM
win 98
run fine for minutes or hours...then screen just goes black. sometimes it flickers to blacks ffor a few frames before totally going out. then I need to reboot. have used two difference video card, directx 9c, all new video and agp drivers.......oddly this all happened AFTER updating windows. And when I paly say splinter cell, it never crashes. can anyone help me. You can email me at sdinsd2000@yahoo.com Thanks |
Re: Booting Up Problem by Anonymous Ghost on December 16th, 2004 12:52:39 AM
there are 30 system it will take time to boot for 15-20 min the configuration is 20gb harddisk 128 mbddr Ram Celeron Proccessor operating system
win 2000professional so plz mail me what is the problem
Email-id talk2naveen17@rediffmail.com |
Re: Booting Up Problem by Anonymous Ghost on December 22nd, 2004 12:51:02 PM
running dual operating systems, me and xp and they wont recognize my modem ? |
Re: Blank Screen by Anonymous Ghost on January 06th, 2005 12:25:55 PM
Instead of a screen saver, if I ignore my comp. it will go to a black lank screen and &^%76-up what ever I have going. Sometimes it comes back if I tap pad...most times no. What is goin on? |
Re: Booting Up Problem by Anonymous Ghost on January 08th, 2005 11:16:32 AM
Check the power settings in the control panel of the same name. Your system could be going into hibernation. |
Re: Booting Up Problem by Anonymous Ghost on January 22nd, 2005 04:40:58 AM
No-one seems to answer the questions |
Bios of a toshiba satellite pro 4600 by Anonymous Ghost on February 02nd, 2005 11:37:14 AM
How do I reset the bios of a satellite pro 4600? So that I can get rid of a bios level password that I've forgotten? |
Re: Booting Up Problem by Anonymous Ghost on February 12th, 2005 05:42:06 PM
Hey, I have a MicronPC and I had Windows ME on it. I was changing the operating system to Windows 2000 and now the computer keeps rebooting. I cant even get to my desktop. Any suggestions? |
Re: Booting Up Problem by Anonymous Ghost on September 08th, 2005 08:47:44 AM
when i boot computer the keyboard and mouse do not and a cmos checksum erro comes up,can not press f1 as keyboard not working but does on other computer.please help. |
Re: Booting Up Problem by Anonymous Ghost on October 20th, 2005 10:29:15 PM
Using W2k Pro(just upgraded from Win98), my computer gets to the black "starting windows" screen, the white bar fills, and then it sits. Any help will be appreciated. |
