|
List Home > Web Servers > [ Post New Problem ]
Welcome back !
| TrackingID : | 1551 |
| Posted : | Monday, June 07th, 2004 05:24:44 AM |
| By : | bugs |
| Sambar Proxy Server not working | Configuration: |
I have a Mixed network of NT4 servers, XP pro Servers, and XP Pro Clients. I am working on running all the clients internet connection through sambar Proxy server, but i`m having problems. As far as I can see I have configured Security.ini and config.ini correctly but at the clients it gives me a \"Page cannot be displayed\" error. sometimes the page does appear in sambar with a 500 error which is something internal was not configured right, but other times it doesnt display anything and goes straight to the error. can anyone help me?
Additional Comments:
Windows XP Pro computers
| Operating System : Windows XP Pro
CPU/Processor : AMD 2600 MHz
RAM : Kingston Actual:1024 MB Max:1024 MB
Motherboard : Asus 133MHz
Hard Disk : Seagate, Space: 80 GB, RPM:7200
Partition Details : 1 80Gb Partition second 60Gb drive
PCI Slots : Total: 5 Free: 2
Monitor : Blinea
Video Card : Sparkle
|
Related Problems :
Comments :
Re: Sambar Proxy Server not working by scorpio on June 08th, 2004 01:17:05 AM
In Internet Explorer. Click Tools > Internet Options > Connections Tab > LAN Settings button.
In the dialog that opens, check the checkbox 'Use a proxy server' and give the address and port number of your proxy server.
Hope this helps. |
Re: Sambar Proxy Server not working by Anonymous Ghost on June 08th, 2004 01:27:41 AM
Microsoft Internet Explorer
Open the Microsoft Internet Explorer Web Browser.
Open the Tools menu.
Select the Internet Options menu item.
Click on the Connections tab.
Click on the Lan Settings button.
Select Connect through a proxy server.
Click on the Settings button.
Type the following settings in the Servers section:
HTTP: Port: 80
Leave all other field blank.
Click the OK button to close the Proxy Settings dialog box.
Click the OK button to close the Options dialog box.
Note: With version 6.0 beta 5 and later releases, it is recommended you select the "Advanced" tab and check "Use HTTP/1.1 thru Proxy Connections".
Lastly, if your clients are using the Sambar Proxy Server as well as the Sambar HTTP Server, they must configure the No Proxy for: field of their browser to the Sambar HTTP Server, port 80. For Internet Explorer, the "bypass proxy servre for local internet addresses" should be turned on. |
Re: Sambar Proxy Server not working by Anonymous Ghost on June 08th, 2004 01:32:13 AM
Read
Type the following settings in the Servers section:
HTTP: Port: 80
as
Type the following settings in the Servers section:
HTTP: YourIPAddress Port: 80 |
Re: Sambar Proxy Server not working by bugs on June 10th, 2004 03:18:09 AM
I have done this I set up explorer and tried both the name of the PC and its IP address through port 80 and it still will not work the strange thing is the page asked for appears in the sambar window but at the client it just returns a Page cannot be displayed error. |
Re: Sambar Proxy Server not working by Anonymous Ghost on August 05th, 2004 10:45:41 AM
bueno |
Re: Sambar Proxy Server not working by Anonymous Ghost on June 06th, 2006 03:06:38 PM
This is a wonderful wealth of information. Good Luck! |
Re: Sambar Proxy Server not working by Anonymous Ghost on June 07th, 2006 03:21:01 AM
Your site is very cognitive. I think you will have good future.:) |
Related Problems :
List Home > Web Servers > [ Post New Problem ] |
|
