hi. i just recently bought everything needed to build a new computer.. this is my first build. in case you need to know the hardware i will put that at the end of my post. everything was working fine when i first ran the computer.. but after i exited BIOS, saved my settings, and turned on my computer again.. it said this:
BAD BIOS CHECKSUM.. CHECKING FLOPPY.. FLOPPY NOT FOUND..CHECKING CD-ROM..CD-ROM FOUND..READING P4P800-E.ROM..COMPLETED.. START ERASING...- START PROGRAMMING.../
PLEASE TURN OFF YOUR SYSTEM AND POWER ON AGAIN TO GET SYSTEM BACK..
ok so i did that and when i turned it back on.. it still said "BAD BIOS CHECKSUM". i went online and did some research on my problem, and found this site. i tried removing the battery for a few minutes like some have said to do but that made no difference. please help me.. i am very eager to get this computer up and running! lol.
Lee Lackie
Motherboard: ASUS P4P800-E DELUXE Socket 478 Intel 865PE ATX
Power supply: ASPIRE ATX-AS520W BLACK ATX 520W
Processor: Intel Pentium 4 3.2E Prescott 800MHz FSB Socket 478
Case: Thermaltake Tsunami VA3000BWA Black Aluminum ATX Mid Tower
Memory: Patriot 2GB (2 x 1GB) 184-Pin DDR SDRAM DDR 400 (PC 3200) Unbuffered (I have two of these.. so 4 GB altogether)
Hard drive: HITACHI Deskstar T7K250 HDT722525DLA380 (0A31636) 250GB 7200 RPM SATA 3.0Gb/s
Graphics card: BFG TECH GeForce FX 5500 OC 256 MB
| Operating System : Microsoft Windows XP
CPU/Processor : Intel Pentium 4 800 MHz
RAM : Patriot Actual:4096 MB Max:4096 MB
Motherboard : Asus/P4P800-E Deluxe 975MHz
Hard Disk : Hitachi, Space: 250 GB, RPM:7200
PCI Slots : Total: 6 Free: 3
Video Card : BFG Geforce 5500
Video RAM : 256 MB
Sound Card : SoundBlaster Xtrememusic 64 Bi
|
