Re: RPL-ROM-FFC: 5 Not Found by Anonymous Ghost on October 21st, 2004 01:47:45 PM
hey i work in a computer repair shop and had the same problem with a machine which is what brought me to your post. If you havent found an answer already try this. Many motherboards after any type of change will have a problem seeing a drive that is set in master if there is no slave on the same cable. Try setting your drive to cable select if it isnt already and see if that helps you. |
Re: RPL-ROM-FFC: 5 Not Found by slicksterick on October 21st, 2004 05:20:18 PM
I'm having the same problem when I try and boot this HDD. |
Re: RPL-ROM-FFC: 5 Not Found by slicksterick on October 21st, 2004 05:23:13 PM
I'm having the same issue when I try and boot the system but I can add the drive as a slave to another system and it boots up. But connecting up to the original I get the RPL-ROM-FFC5 not found msg. Help me!!!!! |
Re: RPL-ROM-FFC: 5 Not Found by Anonymous Ghost on October 22nd, 2004 04:15:06 PM
After I downloaded Service Pack 2, I have had the same error message also. Can anyone explain in English what is going on? I removed the Servie Pack but still have the same problem. |
Re: RPL-ROM-FFC: 5 Not Found by Anonymous Ghost on November 27th, 2004 09:23:07 AM
I'm having the same problem! How can I find a solution? |
Re: RPL-ROM-FFC: 5 Not Found by Anonymous Ghost on November 27th, 2004 10:24:32 PM
I have gotten this to but then my PC wiill boot up and go into problems..so why does the do this at the start and what does it mean?
thanks |
Re: RPL-ROM-FFC: 5 Not Found by Anonymous Ghost on November 27th, 2004 10:27:02 PM
Sorry I may have typed this wrong the first time..what I meant to say is I get this RPL-Rom all the time when PC starts but it does go into XP to the desktop..why does it do this and what does it mean
Thanks |
Re: RPL-ROM-FFC: 5 Not Found by Anonymous Ghost on December 04th, 2004 05:47:53 PM
Hi there, I am Richard Kawuma A+ certified professional. Sorry about the behaviour of your pc, follow these steps they will give you a solution.
1. Restart your pc and go to the BIOS. Check to see if your S.M.A.R.T for hard disk is disabled, if it is, change it to enable and restart your pc.
2. Check you IDE cable, set the jumpers to cable select
3. Check your BIOS and configure it to detect the hard disk automatically.
4. Hope you have go it. You pc should be ready to run.
5. If it doesn't boot up witht the OS then you have to repartition it, format it and reload the OS. I had this problem, when I carried out those procedures, the PC was fine and is now runing very well.
For more contacts visit me on
http://fiorick.tripod.com |
Re: RPL-ROM-FFC: 5 Not Found by Anonymous Ghost on February 21st, 2005 04:14:21 PM
I tried Kawumas suggestion on a windows 98 computer and it fixed the problem. Thank you. |
Re: RPL-ROM-FFC: 5 by Anonymous Ghost on December 20th, 2005 06:49:13 AM
reboot and select proper boot drive or insert boot media in selected boot device and press a key |
Re: RPL-ROM-FFC: 5 by Anonymous Ghost on December 20th, 2005 06:52:05 AM
when I started new computer I get this message: RPL-ROM-FFC:5
Reboot and select proper boot device or insert boot media in selected boot device and press a key. What do I do? |
Re: RPL-ROM-FFC: 5 Not Found by Anonymous Ghost on January 13th, 2006 07:30:29 PM
i entered the bios. Set the SMART to enabled, and set the bios to auto detect my drives. The pc booted up with no problem. I have no idea why this happened. but it is now working. Thanks Kawuma. |
