|
List Home > Operating System > [ Post New Problem ]
Welcome back !
| TrackingID : | 6297 |
| Posted : | Wednesday, October 05th, 2005 01:21:35 PM |
| By : | sonnum |
| IBM Netvista 6792-22U - no beeps no nothing | Configuration: |
Smelled burning from computer. Looked like the CPU and heatsink. Replaced both, and systemboard,then no power so I replaced power supply. Now I don\'t get anything on the monitor. I changed video card with none good - still nothing.
Additional Comments:
Thought I might have received doa parts, so I replaced the sys. board, cpu and heatsink again. Even tried updating the bios.
| Operating System : xp professional
CPU/Processor : pentium 400 MHz
RAM : IBM Actual:356 MB
|
Related Problems :
Comments :
Re: IBM Netvista 6792-22U - no beeps no nothing by Anonymous Ghost on October 05th, 2005 01:39:39 PM
the problem seems to with the power supply, make sure its plugged in properly.
coz if it reached the self test state then beep/long beep should come telling that RAM is fine or not.
check the power supply again.
i hope u didnt forget to push that power switch to the 'ON' position in the main power line/ the smps,.... |
Re: IBM Netvista 6792-22U - no beeps no nothing by sonnum on October 06th, 2005 08:28:46 AM
There is no "on" in the main power line (I looked up smps on the internet - and not sure what i'm looking for) I used a working power supply from another pc before I replaced the cpu and systemboard the second time. |
Related Problems :
List Home > Operating System > [ Post New Problem ] |
|
