|
List Home > Operating System > [ Post New Problem ]
Welcome back !
| TrackingID : | 392 |
| Posted : | Tuesday, January 13th, 2004 05:49:30 AM |
| By : | khimansu |
| Computer hangs up | Configuration: |
|
sometimes it hangs up in the booting stage sometimes it boots well and then hangs up sometimes there is no problem
| Operating System : Microsoft windows 98 SE
CPU/Processor : celeron 1.7 MHz
RAM : unknown Actual:128 MB
Motherboard : D845GVLA
Hard Disk : samsung, Space: 40 GB
Partition Details : 2
PCI Slots : Total: 3
Monitor : LG 15"
|
Related Problems :
Comments :
Re: Computer hangs up by Anonymous Ghost on January 14th, 2004 03:22:53 AM
There are too many tasks running in the background which delays the boot process(i.e start up programmes).Try disabling the start up programmes using ms config
through safe mode. |
Re: Computer hangs up by sheahanm on February 10th, 2004 03:31:57 PM
PCI Parity Error on Bus/Device/Function 0100h |
Re: Computer hangs up by Anonymous Ghost on February 11th, 2004 10:34:21 AM
Re: Computer hangs up by sheahanm on February 10th, 2004 04:31:57 PM
PCI Parity Error on Bus/Device/Function 0100h
No idea :( |
Re: Computer hangs up by Anonymous Ghost on July 26th, 2004 08:51:39 AM
windows 98 will not shout down |
Re: Computer hangs up by Anonymous Ghost on July 26th, 2004 08:54:07 AM
My computer also will not shut down. It gets to the "Windows ids shutting down" screen, snd just hangs there until I manually shut it down. |
Re: Computer hangs up by arionrufus on October 07th, 2004 02:50:37 AM
This is a 50/50 chance that it will work. Boot to command prompt using an emergency boot floppy disk or the bootable CD. Change the path to c:\windows\command\> prompt. Type: scanreg /fix ...Wait for the result(s). If it has fixed the prob, remove floppy boot disk or OSCD then, turn off computer manually, reboot. If it doesn't boot to the OS normally, repeat procedure/steps but the change the switch to /restore e.g.: scanreg /restore in the c:\windows\command\> prompt. Wait for the results again then reboot. If nothing else works, well...format HD & reinstall OS, drivers & the applications. Good luck! |
MSGSRV32 not responding by Anonymous Ghost on October 26th, 2004 07:46:03 AM
At the time of fresh installation of 98se, after inputting the sr. no. machine hangs. when we press ctrl + alt + del button it shows MSGSRV32 not responding.
If we install through ghost setup it hangs up before the start menu screen comes up. |
Re: Computer hangs up by shaj_hai on November 07th, 2004 12:38:42 AM
my computer hangs up at verifying dmi pool data |
Related Problems :
List Home > Operating System > [ Post New Problem ] |
|
